DELRAY PLA Metallic
$15.00 $24.95
DELRAY PLA Metallic is an aesthetic, PLA-based filament with sparkling flakes inside. Slightly modified, the filament retains the typical features of PLA, but it is tougher and less brittle. Because of the translucency of PLA combined with the flakes, the color saturation of your print can be increased by increasing wall thickness.
color
Weight
Diameter
Choose Quantity
Product Details
Specifications
Due to its low tendency to warp PLA Metallic can also be printed without a heated bed. If you have a heated bed the recommended temperature is ± 35-60˚C.
PLA Metallic can be used on all common desktop FDM or FFF technology 3D printers. It is recommended to purge the nozzle after printing, to prevent the build-up of flakes for the next print.
PLA Metallic can be used on all common desktop FDM or FFF technology 3D printers. It is recommended to purge the nozzle after printing, to prevent the build-up of flakes for the next print.
Features:
- Beautiful sparkling effect
- Layers are not visible
- Tougher and less brittle compared to regular PLA
- Easy to print
- Low warping
- Limited smell
- Not abrasive
Storage:
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
DELRAY PLA Metallic
- Specific gravity:1.24g/cc
- MFR 210°C / 2.16 kg:9.56 gr/10 min
- Tensile strength at yield:70 Mpa
- Strain at yield:5%
- Strain at break:20%
- Tensile modulus:3120 Mpa
- Impact strength - Charpy method 23˚C:3.4 kJ/m²
- Moisture absorption:1968 ppm
