THE #1 SLS 3D PRINTING PLATFORM
Designed for maximum output and minimum waste, Fuse 1+ 30W is our compact industrial SLS 3D printer. Unlock unprecedented print speeds and material enablement to deliver truly rapid production in-house. From print setup to powder recovery, our easy-to-use hardware and software are designed to maximize your efficiency at every step of the process.
30W Laser Power: Speeds up production to deliver same-day functional parts.
Zero-Support Design: SLS technology allows complex, interlocking geometries with no support structures.
End-to-End Workflow: Pairs seamlessly with Fuse Sift and Fuse Blast for fast post-processing.
BUILD YOUR PACKAGE
1. Select Printer / Package
Fuse 1+ 30W Printer 120V (including Build Chamber)
$24,649
- Fuse 1+
- Build Chamber
Fuse 1+ 30W Starter Package 120V
$24,999
- Fuse 1+ 30W Printer 120V (including Build Chamber)
- Fuse Series Powder Cartridge
- Fuse Depowdering Kit
- Fuse Depowdering Kit Sifter (120V) with 150 Sieve
Fuse 1+ 30W Complete Package 120V
$56,902
- Fuse 1+ 30W Printer 120V (including Build Chamber)
- Fuse Series Build Chamber 120V
- Fuse Series Powder Cartridge x2
- Fuse Series Printer Stand
- Fuse Sift 120V
- Fuse Blast
- Fuse Blast Polishing Agent 115 mL
- Fuse Blast Polishing Media 4 L (2.5 kg) x2
- Fuse Blast Polishing Mesh
- Fuse Blast Polishing Module
- Fuse 1 Generation Quartz Tube Heater 120V x2
- Fuse 1 Generation Air Intake Filter
- Fuse 1 Generation Air Exhaust Filter
- Fuse 1 Generation Build Chamber External Frame Gasket
- Fuse Build Chamber Inner Gasket
- Fuse 1 Generation Build Chamber Lead Screw Cleaning Kit
- Fuse 1 Generation Build Chamber Print Bed Assembly
- Fuse 1 Generation Optical Cassette
- Fuse 1 Generation IR Sensor Kit
2. Optional Add-ons
3. Fuse Series Service Plan (Optional)
Fuse Series Complete Service 1 Year
+$4,500
Fuse Series Complete Service 3 Years
+$9,000
Fuse Series Complete Service 5 Years
+$13,500
Tech Specs
| Build Volume | 165 × 165 × 300 mm | 6.5 × 6.5 × 11.8 in |
| Layer thickness | 110 microns | 0.004 in |
| Laser Type | Ytterbium Fiber, 30 W |
| Laser Spot Size | 330 microns | 0.012 in |
| Material Refresh Rate | As low as 20% |
| Materials | Nylon 12, Nylon 12 Tough, Nylon 12 White, Nylon 11, Nylon 12 GF, Nylon 11 CF, and TPU 90A Powders, or any 1064 nm powder with Open Material Mode. |
| Print Enviorment | Air and Nitrogen |
| Footprint | 4.8 Sq.Ft |
| Warranty and Services | Production and Self-Service plans available |
