UltiMaker Tough PLA
$58.00
Certified NFC Ultimaker Material
Ultimaker Tough PLA is a PLA (polylactic acid) material sporting a toughness similar to ABS. Ideal for reliably printing functional prototypes and tooling at larger sizes, UltiMaker Tough PLA offers the same safe and easy use as regular PLA.
color
Diameter
Weight
Choose Quantity
Product Details
Specifications
Features:
- Impact strength similar to ABS, greater than regular PLA
- Higher stiffness than typical ABS
- Less brittle than regular PLA
- Provides a more matte surface finish quality than regular PLA
- Suitable for post-processing with improved machinability when compared to regular PLA
- More reliable than ABS for larger prints, with no delamination or warping
- Compatible with Ultimaker support materials (PVA and Breakaway), allowing for full geometric design freedom
Compatibility:
Ultimaker Tough PLA is officially supported by the Ultimaker S5, Ultimaker S3, and Ultimaker 3 series of 3D printers. It is compatible for dual extrusion with the following materials:
- Ultimaker Tough PLA
Ultimaker PVA
Ultimaker Breakaway
UltiMaker Tough PLA
- Diameter:2.85±0.05 mm
- Max roundness deviation:0.05 mm
- Net filament weight:750 g
- Filament length:~96 m
- Tensile modulus:1820 MPa
- Tensile stress at yield:37 MPa
- Tensile stress at break:37 MPa
- Elongation at yield:3.1%
- Elongation at break:3.1%
- Flexural strength:78 MPa
- Flexural modulus:2490 MPa
- Izod impact strength, notched (at 23 oC):9 kJ/m2
- Hardness:79 (shore D)
- Melt mass-flow rate (MFR):6-7 g/10 min
- Vicat softening temperature:63 °C
- Glass transition:62 °C
- Melting temperature:151 °C
- Specific gravity:1.22
