- Material
- >
- BigRep Material
- >
- BigRep PRO HT
BigRep PRO HT
SKU:
$188.00
59
608
$59.00 - $608.00
Unavailable
per item
BigRep’s PRO HT is a general-use, bio performance material for open-environment 3D printing. With increased temperature resistance, minimal warping and shrinking, Pro HT is an ideal PLA alternative and the choice material for wearable devices or any general-purpose product that may face higher than average temperatures.
Key Features:
Key Features:
- Heat resistance up to 115 °C
- Low warping and shrinkage
- Easy printing and support removal
- Environmentally Friendly Thermoplastic
- Food Safe
- Matte Finish
Product Specifications:
Compatibility with:
As a material derived from organic compounds, BigRep's PRO HT offers users a filament with lower environmental impact than that of polymers derived from fossil fuels.
PRO HT is both CO2 neutral and biodegradable under the correct conditions, and it meets EU Directives and FDA requirements on food contact. |
Material: |
BioPolymer |
Filament Sizes: |
750g, 2.5, 4.5, and 8.0 kg |
Diameter: |
1.75, and 2.85 mm |
Density: |
1.3 g/cm³ |
Flexural Modulus (ISO 178): |
3300 MPa |
Tensile Strength (ISO 527): |
44 MPa |
Impact Strength Notched: |
18 kJ/m² |
Heat Resistance HDT / B (ISO 75): |
>45 °C |
Hardness (Shore): |
D 75 |
Recommended Printing Conditions |
|
Nozzle Temperature |
195 – 205 °C |
Print Bed Temperature |
55 – 60 °C |
Environmental Temperature |
n.s. °C |
Printing Speed |
>40 mm/s |