PC-ABS is an incredibly strong filament with an even higher impact resistance than our regular ABS. This is a consequence of the addition of the proper amount of polycarbonate in this modification, which also creates a nearly perfect interlayer adhesion and a beautiful surface gloss. The above features, combined with a highly stable printing process makes PC-ABS the perfect material for mechanical parts and tools, which should be light and strong and show minimal wear after prolonged use.
|
|
Additional info:
Recommended temperature for heated bed is +100˚C. We recommend kapton and / or pva glue stick for adhesion.
PC-ABS can be used on all common desktop FDM or FFF technology 3D printers.
Storage:
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
Recommended temperature for heated bed is +100˚C. We recommend kapton and / or pva glue stick for adhesion.
PC-ABS can be used on all common desktop FDM or FFF technology 3D printers.
Storage:
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
