​S3

Ultimaker S3

$4,450.00
SHOP NOW
​Professional Performance for Any Budget​
Every detail of the Ultimaker S3 has been designed and built to deliver professional S-line print quality. Inside the Ultimaker S3, you'll find:
  • Reinforced feeder wheels made from coated, hardened steel. These enable abrasion-resistant 3D printing for high-strength parts using glass or carbon fiber composites (when paired with Ultimaker print core CC Red)

  • Dual filament flow sensors that increase your print success rate. If you run out of filament, they pause your print and notify you to add a new spool

  • Advanced active leveling that ensures easy and reliable first-layer adhesion. Begin a print job and get on with your work, thanks to precise build area probing and Z-height build plate compensation at the start of every print job
​
  • High-accuracy stepper drivers taken directly from the Ultimaker S5. These high-precision drivers are quieter than the Ultimaker 3 and run more reliably

The most cost-effective way to adopt in-house 3D printing

The Ultimaker S3 has taken the best features from the S5 and combined them into a smaller, more affordable device. The S3 delivers the same high-quality, composite-ready dual extrusion, with the same market-leading reliability and ease of use – just with a smaller build volume (230 x 190 x 200 mm or 9.1 x 7.4 x 7.9 inches).
Beyond that, the Ultimaker S3 has been further optimized for its form factor. These small features work together to improve the 3D printing experience:
  • Rigid printer frame reduces small vibrations (or ringing) while printing to improve overall print quality

  • Single glass door with a magnetic latch provides a more controlled build environment to reduce the risk of warping or delamination

  • Optimized internal design allowing both dual extrusion nozzles to reach the whole build area, while maintaining a high build-volume-to-size ratio

  • Internal power supply removes the need to make space for a power brick. It also makes the setup process easy across all S-line 3D printers
Seamless Workflow Integration 

With its low annual cost of ownership, the Ultimaker S3 offers users an affordable entry to professional 3D printing, making ROI easy and fast to achieve. A seamless hand-off between software and hardware delivers an end-to-end solution that accelerates in-house production workflow, meaning that entrepreneurs and those using additive manufacturing now have a lower barrier to entry – without needing to compromise on performance.
Powerful & Efficient
​
Inside an efficiently small footprint suitable for any desk, the Ultimaker S3 delivers composite-ready dual extrusion that your process can rely on. With market-leading technology, the S3 is as easy to use as it is powerful. It displays step-by-step setup, navigation, and maintenance, ultimately reducing the learning curve. In fact, customers have stated that they feel confident enough to start printing their own designs after only a 30-minute introduction period — so there's no need to spend money on a dedicated operator.
​S3
$4,450.00
SHOP NOW

Technical Specifications:

Dimensions:
Build Volume:
​230 x 190 x 200 mm
(9 x 7.4 x 7.9 inches)
Assembled Dimensions:
​394 x 489 x 637 mm
(15.5 x 19.3 x 25.1 inches)
Print technology:
Fused filament fabrication (FFF)
Weight:
​​20.6 kg (45.4 lbs)
Compatible Filament Diameter:
​​2.85 mm
Maximum Power Output:
​500 W
Printer Properties:
Layer Resolution:
​0.25 mm nozzle: 150 - 60 micron
0.4 mm nozzle: 200 - 20 micron
0.6 mm nozzle: 300 - 20 micron
0.8 mm nozzle: 600 - 20 micron
XYZ Resolution:
6.9, 6.9, 2.5 micron
Feeder Type:
Dual-geared feeder, reinforced for composite materials
Display:
​4.7-inch (11.9 cm) color touchscreen
Print core replacement:
​Swappable print cores
Print Head:
Dual extrusion print head with an auto-nozzle lifting system and swappable print cores
Nozzle Diameters:
0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm
Operation Parameters:
Build Speed:
< 24 mm³/s ​
Nozzle Temperature:
180 - 280 °C
Nozzle Heat-Up Time:
< 2 minutes
Operating Sound:
< 50 dBA
Build Plate Leveling:
Advanced active leveling
Build Plate:
20 - 140 °C heated glass build plate ​
Build Plate Heat-Up Time:
< 4 minutes (from 20 to 60 °C)
Operating Ambient Temperature:
15 - 32 °C (59 - 90 °F)
Non-Operating Temperature:
0 - 32 °C (32 - 90 °F)
Ecosystem:
Supplied Free Software:
​Ultimaker Cura  – print preparation software
Ultimaker Digital Factory – printer management software
​Supported OS:
​MacOS, Windows, and Linux
Plugin Integration:
SolidWorks, Siemens NX, Autodesk Inventor
Supported File Types:
​Ultimaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG
Printable formats: G, GCODE, GCODE.gz, UFP
File Transfer:
​Wi-Fi, Ethernet, USB