Bambu Lab PLA Basic Gradient
Blending two colours smoothly creates a lively and amazing visual effect on printed models. The gradient colours make it perfect for printing cute toys or decorations, and you can print as fast as 300mm/s (using a 0.4mm nozzle) while still getting that delicate and polished finish.
Introducing fresh colour choices to the PLA Basic series, the gradient filament maintains the same performance level as PLA Basic, but comes with even better layer adhesion and toughness. This helps minimize the chances of your printed parts breaking.
- Soft Bicolor Gradient
- Delicate Finish
- Comes with Basic Reusable Spool
- AMS Compatible
Soft Bicolor Gradient Appearance
The soft transition between two colors creates a vibrant and stunning visual effect on printed models.
The soft transition between two colors creates a vibrant and stunning visual effect on printed models.
Display of Gradient Prints
Gradient colors make it ideal for printing pretty toys or decorations.
Gradient colors make it ideal for printing pretty toys or decorations.
8 ~ 10 Meters Gradient Length
Smaller models with less filament consumption will have a less noticeable gradient looks, while larger models with more filament consumption comes with a noticeable gradient looks.
Smaller models with less filament consumption will have a less noticeable gradient looks, while larger models with more filament consumption comes with a noticeable gradient looks.
Bambu Lab PLA Gradient
- Drying Settings (Blast Drying Oven):55 °C，8 h
- Printing and Keeping Container's Humidity:Less than 20% RH (Sealed, with Desiccant)
- Nozzle Temperature:190 - 230 °C
- Bed Temperature (with Glue):35 - 45 °C
- Printing Speed:Less than 300 mm/s
- Density:1.24 g/cm³
- Vicar Softening Temperature:57 °C
- Heat Deflection Temperature:57 °C
- Melting Temperature:160 °C
- Melt Index:42.4 ± 3.5 g/10 min
- Tensile Strength:36 ± 2 MPa
- Breaking Elongation Rate:15.2 ± 0.5 %
- Bending Modulus:2270 ± 60 MPa
- Bending Strength:73 ± 3 MPa
- Impact Strength:61.2 ± 2.8 kJ/m²
