Sinterit PA12 Industrial Fresh Powder
$830.00
(6KG)
A high resistance nylon 12 with very good dimensioning accuracy of prints. Perfect for functional prototyping, jigs and fixtures and end use parts.
Printer Compatibility:
- LISA X
Product Details
Specifications
Features:
- Very good dimensional accuracy
- Biocompatible
- Excellent mechanical properties
- High chemical resistance
Applications:
- Prototypes with great mechanical properties
- Snap-fit designs
- Jigs & fixtures
- Parts with very good dimensioning
- Toolings
What is the Refresh Rate?
It is the ratio of a minimum amount of fresh powder needed in a mixture of material used in an SLS 3D printer. A lower refresh ratio means better cost-efficiency of the material.
How it Works:
The amount of needed fresh powder is automatically calculated by our software and shown on the printer screen after the print job is finished. Just add shown amount of material into the mixing cycle of used material and you can start your next job with refreshed material
To start SLS 3D printing you need the powder starter pack. After that, you’ll only need to refresh the powder you own with fresh powder.
Sinterit PA12 Industrial Fresh Powder
- Material type:Nylon 12
- Software:Sinterit Studio Basic
- Nitrogen needed:No
- Refresh ratio:30%
- Color:grey mat
- Mean particle size D50:62 µm
- Bulk density:505 kg/m3
- Printout density:1.033 g/cm3
- Printout water absorption:0.633 %
- Tensile Strength:52.3 MPa
- Elongation at Break:7.8 MPa
- Tensile Modulus:1840 MPa
- Flexural Strength:60.6 MPa
- Flexural Modulus:1380 MPa
- Shore hardness in type D scale:75
- Impact strength (Charpy method - unnotched):29.5 kJ/m2
- Melting point:184.4 °C
- Weight:6kg
- ISO 10993-23:no irritant
- ISO 10993-5:non-cytotoxic
